Why chooseArmatherm™
Same day delivery option
Tested to ASTM standards
Stock always on hand
Code compliance
LEED benefits
Manufactured in the US
OurAccreditations
Armatherm applications
Armatherm™ FRR — Masonry Shelf Angle Thermal Bridging Solution
Masonry veneer walls need shelf angles and tie-backs, which create substantial thermal bridges and can lower a wall’s R value by as much as 50%, making it challenging to meet energy code requirements.
Armatherm™ 500 – Column Base Thermal Bridging Solution (load dependent)
Traditionally, the base of steel columns extends through the floor slab and insulation of the building.
Armatherm™ 500 – Foundation Wall Thermal Bridging Solution (load dependent)
The thermal envelope of a building includes the foundation. Heat escapes from a structure predominantly through non-continuous insulation features at the transition between a slab on grade and foundation wall and at the transition between an exterior wall and foundation.
Armatherm™ FRR – Balcony Canopy Thermal Bridging Solution
The canopies and balconies that use cantilevered steel or aluminium elements are the most frequent interface details for structural framework.
Armatherm™ FRR – Parapet Roof Penetration Thermal Bridging Solution
The thermal envelope and roof insulation are both parts of the building envelope that are broken up by penetrations like davits, anchors, and supports for dunnage.
Armatherm™ Z-Girt – Cladding Thermal Bridging Solution
The thermal performance of wall assemblies is considerably enhanced by Armatherm cladding attachments. Low thermal conductivity and strong compressive strength are used with Armatherm FRR Z Girt, Clip, and Thermal Break Shims to transfer load while minimising heat loss.
ThermalBreak resources
Take advantage of our valuable online resources on our website, including test reports, extensive literature libraries, design assistance and product profile videos to help you understand the importance of thermal break products, the key features of our products and the applications in which they can be used. If you require CAD drawings for your project, these can be accessed via the Armatherm™website and downloaded to be easily incorporated into your project plans.
Our easy-to-follow online thermal breaks webinar is also accessible online, with the course providing an overview and introduction to thermal bridging, discussing how and why it occurs, as well as how it can be prevented. It showcases and compares the difference between building details with and without thermal break solutions to demonstrate the necessity of determining accurate values of thermal transmittance within a project.
Armatherm resources
Downloads
Request a quote
If you require a quotation and know the following product information, complete through form below.
